top of page
< Back

Running Shoe Jargon Explained: A Runner's Guide To Choosing The Right Running Shoes

Buying a pair of running shoes should be simple. Unfortunately, once you start researching different models, you're quickly faced with terms such as pronation, gait analysis, heel drop, midsoles, stability shoes and neutral shoes. For new runners, it can feel overwhelming, while even experienced runners sometimes struggle to keep up with the latest terminology and technology.

Buying a pair of running shoes should be simple. Unfortunately, once you start researching different models, you're quickly faced with terms such as pronation, gait analysis, heel drop, midsoles, stability shoes and neutral shoes. For new runners, it can feel overwhelming, while even experienced runners sometimes struggle to keep up with the latest terminology and technology. The reality is that understanding a few key concepts can make choosing the right running shoe much easier. You don't need a degree in biomechanics and you certainly don't need to understand every piece of marketing jargon. What you do need is a basic understanding of how your feet move, the different types of shoes available and the features that might matter to you. Here's a guide to some of the most common running shoe terms and what they actually mean. Understanding Pronation One of the first terms you'll encounter when buying running shoes is pronation. Pronation describes the natural movement of your foot as it rolls inward after making contact with the ground. This movement helps absorb impact and distribute forces through your foot and lower leg during running. Most runners fall into one of three broad categories. Neutral runners experience a normal amount of inward movement and generally distribute impact evenly through the foot. Overpronators experience excessive inward rolling, placing additional stress on the inside of the foot and ankle. Underpronators, sometimes referred to as supinators, roll less than normal and tend to place more pressure on the outside edge of the foot. It's important to remember that pronation is not necessarily a problem. Many runners have slight variations in foot movement and never experience any issues. However, understanding how your feet move can help guide your shoe selection. What Is Gait Analysis? Gait analysis refers to the assessment of how your body moves when walking or running. In clinical settings, gait analysis can involve sophisticated equipment, motion capture technology and detailed biomechanical assessment. However, most runners encounter gait analysis in running stores, where staff observe them walking or running for a short period, often on a treadmill. While these in-store assessments can provide useful information, they should not be viewed as definitive medical evaluations. They are simply one tool that can help narrow down suitable shoe options. Experienced running shop staff will often combine what they observe with discussions about your running history, injury record and current footwear to make recommendations. The best advice remains surprisingly simple. Visit a specialist running shop, try several pairs on and see what feels comfortable. Modern research increasingly suggests that comfort is one of the best indicators that a shoe is suitable for you. Read more here. Neutral Shoes And Stability Shoes Once you've identified your likely running style, you'll encounter the terms neutral and stability. These are the two main categories of running shoes. Neutral shoes are designed for runners whose feet move naturally through the gait cycle. They focus on cushioning, comfort and flexibility without incorporating corrective features. They are also suitable for many runners who slightly underpronate. Today, the vast majority of running shoes sold fall into the neutral category and many runners find them perfectly adequate. Stability shoes are designed to provide additional support for runners who overpronate. They use various technologies to encourage a more controlled foot movement and can help some runners feel more stable during their stride. Different manufacturers achieve this in different ways, with some using guide rails, firmer foams or wider platforms to create additional support. The distinction between neutral and stability shoes remains important, although modern stability shoes are often far less intrusive than they were a decade ago. Road Shoes, Trail Shoes And Racing Shoes Not all running shoes are designed for the same terrain. Road running shoes are intended for pavements, roads and other hard surfaces. They prioritise cushioning, comfort and efficient forward movement. Trail running shoes are designed for off-road environments. They feature more aggressive outsoles with deeper lugs to provide grip on mud, loose gravel and uneven ground. They often include additional protection around the toe box and sidewalls and some models incorporate waterproof membranes for wet conditions. Racing shoes represent a third category. Modern racing shoes are typically lightweight and highly responsive, often incorporating advanced foams and carbon plates designed to improve running efficiency. While they can help runners perform at their best on race day, they are generally not intended for every training run. Many runners eventually own shoes from more than one category, selecting different pairs depending on where and how they are running. Trails shoes look a bit different now! The Main Parts Of A Running Shoe Although modern running shoes contain a lot of technology, they are still built around two main components: the upper and the sole. The upper is the fabric section that wraps around the foot. It includes the toe box, where your toes sit, the tongue beneath the laces, the heel collar around the ankle and the heel counter at the rear of the shoe. Modern uppers are usually constructed from lightweight engineered mesh materials designed to balance breathability, comfort and support. The sole is divided into two sections. The midsole sits directly beneath your foot and provides cushioning and support. This is where most of a shoe's technology is located, including the specialised foams used by different brands. The outsole is the rubber layer that comes into contact with the ground. It provides grip, durability and protection for the softer midsole foam beneath. When runners talk about how soft, responsive or supportive a shoe feels, they are usually referring to the characteristics of the midsole. What Is Heel Drop? Heel drop, often referred to simply as drop, is one of the most misunderstood shoe specifications. It refers to the difference in height between the heel and the forefoot. Traditional running shoes often have a drop of around 10mm to 12mm, meaning the heel sits higher than the front of the shoe. Lower-drop shoes reduce this difference, while zero-drop shoes place the heel and forefoot at the same height. A higher drop can encourage a more heel-first landing pattern, while lower-drop shoes often promote a midfoot or forefoot strike. Neither approach is automatically better than the other. The important thing is to recognise that changing drop significantly can place different stresses on the body, particularly the calves and Achilles tendon. If you're considering moving to a much lower drop shoe, it is wise to make the transition gradually rather than switching overnight. Cushioning And Running Shoe Technology Modern running shoe brands invest enormous resources in developing cushioning systems and proprietary foam technologies. While the names vary from brand to brand, the goal is generally the same: to improve comfort, absorb impact and provide a more efficient running experience. Today's shoes are often lighter, softer and more responsive than ever before. However, the most important factor is still how the shoe feels when you run in it. A highly rated shoe that feels uncomfortable on your feet is unlikely to be the right choice, regardless of how impressive the technology sounds. Comfort, fit and suitability for your running style remain far more important than any marketing slogan printed on the side of the shoe. Choosing The Right Running Shoe Running shoes are arguably the most important piece of equipment you'll ever buy as a runner. The right pair can make training more enjoyable, improve comfort and help reduce the risk of injury. The wrong pair can quickly turn running into an unpleasant experience. If you're new to running, visiting a specialist running shop is often the best place to start. Take your time, ask questions and try on several different models. Don't be pressured into making a quick decision and don't be afraid to leave and come back another day if you're unsure. The more you understand about running shoe terminology, the easier it becomes to cut through the marketing language and focus on what really matters. At the end of the day, the best running shoe is usually the one that feels comfortable, supports your running goals and makes you want to get out and run.

choosing-the-right-running-shoes

bottom of page